Overview

Dromex® 3020 adjustable flat fold dust mask is suitable for 8-hour use against solid and water based liquid aerosols protecting the user from inhaling dangerous particulates in high dust areas when used in the mining, asbestos, agriculture, construction and general material handling industries.

Dromex® 3020 disposable dust mask, features the following:

• Dual adjustable head band straps on cheeks allowing optimum fit.

• A non-metal adjustable nose clip for ease of moulding onto nose.

• Polypropylene synthetic material preventing allergies.

• Light weight and comfortable to use in humid environments.

The pre-filter scrim protects the mask body from dirt and clogging making this mask the ideal solution for prolonged user comfort

These respirators do not supply oxygen. DO NOT use in oxygen deficient atmospheres (e.g. tanks or other poorly ventilated areas). The lifetime of a filter depends on many factors including the work rate, the air flow and the concentration of the contaminant in the atmosphere. A dust filter should be discarded and replaced with a new one if:

• The respirator is removed while in a contaminated area.

• Excessive clogging of the respirator causes breathing difficulty or discomfort.

• The respirator becomes damaged.

All respiratory equipment should be read in conjunction with BS EN 529:2005 “Respiratory Protective devises – Recommendations for selection, use, care and maintenance”.

Do not use these respirators or enter in an area where:

• The Oxygen concentration is not known or is less than 19%.

• Contaminants or their concentrations are unknown or are known to be immediately dangerous to life or health.

• Particulate concentrations exceed levels fixed by the applicable health and safety regulations or protection factors x NPF, whichever is lower (Nominal protection factors: 4.5 for FFP1, 12.5 for FFP2 and, 50 for FFP3).

• Gases and/or vapours are present except for respirators designated as protecting against vapours, in which case vapour concentrations should not exceed 4.5 NPF.

• The requirement for leak tightness is unlikely to be achieved if worn against a beard or facial stubble.

• Do not use in explosive atmospheres.

• Not to be used for firefighting.

when transporting this product, retain in its original packaging and keep away from mechanical and chemical hazards.

None of the materials or processes used in the manufacture of these products are known to be harmful to the wearer. The manufacturer has examined under the system for ensuring quality of production by means of monitoring and inspection. These disposable dust half masks are designed to accommodate the basic safety requirements and standards for Personal Protective Equipment.

The information contained herein is intended to assist the wearer in the selection of personal protective equipment.Actual conditions of use cannot be directly simulated in a test environment therefore it is the responsibility of the user and not the manufacturer or supplier to determine the disposable dust, half mask suitability for the intended use.

• Gases and/or vapours are present except for respirators designated as protecting against vapours, in which case vapour concentrations should not exceed 4.5 NPF.

• The requirement for leak tightness is unlikely to be achieved if worn against a beard or facial stubble.

• Do not use in explosive atmospheres.

• Not to be used for firefighting.

When transporting this product, retain in its original packaging and keep away from mechanical and chemical hazards.

None of the materials or processes used in the manufacture of these products are known to be harmful to the wearer. The manufacturer has examined under the system for ensuring quality of production by means of monitoring and inspection. These disposable dust half masks are designed to accommodate the basic safety requirements and standards for Personal Protective Equipment.The information contained herein is intended to assist the wearer in the selection of personal protective equipment.Actual conditions of use cannot be directly simulated in a test environment therefore it is the responsibility of the user and not the manufacturer or supplier to determine the disposable dust, half mask suitability for the intended use.

DOWNLOAD BROCHURE

Certifications

NRCS Homologated as per SANS 10338:2009 as required by the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993), and the Mine Health and Safety Act, 1996 (Act No. 29 of 1996). SANS 50149:2003 Respiratory protective devices – Filtering half mask to protect against particles – Requirements, testing, marking, NRCS Type Approval No.: NRCS/8072/0167.BS EN 149:2001 + A1:2009 Respiratory protective devices – Filtering half masks to protect against particles.Dolomite tested as per BSI, CE 690046

Maintenance

This is a disposable item so no cleaning and maintenance is required.Shelf life3 years. The expiry date of each item is indicated on box packaging.

Disposal

All industrial waste should be disposed of correctly per local regulations and good disposal practice. Respiratory protective devices should be disposed of considering the hazardous substances they were used for. Please consider recycling.