NIKKI

Front Brim Hardhat. Vented + Slotted. EN397. Advanced Permasweat breathable sweatband. Quick fit suspension and adjustable ratchet liner

Available Options:

ADD LOGOS TO YOUR HELMETS

Overview

COLOURS:

ITEM CODE FOR WHITE – NIKKI-HH-W

ITEM CODE FOR GREEN – NIKKI-HH-GRN

Description

Nikki lightweight ABS (Acrylonitrile butadiene styrene) plastic hard hat, is designed with contoured rain channels offering maximum lateral side impact and rigidity protection of the head.The Nikki hard hat shell features a high dielectric strength and electrical insulation with an advanced Permasweat breathable sweatband, a quick fit suspension and adjustable ratchet liner especially when working with gloves.

Special Instructions

None of the materials or processes used in the manufacture of these products are known to be harmful to the wearer. The information contained herein is intended to assist the wearer in the selection of personal protective equipment. Never interchange suspension systems as non-matching harnesses are not tested with the helmet and results in limited/reduced head and impact protection where by possible injuries can arise.Actual conditions of use cannot be directly simulated in a test environment so it is therefore the responsibility of the end user and not the manufacturer or supplier to determine the industrial helmet suitability for the intended use

Features

Style : Class 1, adjustable vented, industrial cap with UV (Ultra- violet), inhibitor protector.

Nikki lightweight ABS plastic hard hat, contoured rain channels..Maximum lateral side-
impact and rigidity protection of the head.

High dielectric strength and electrical insulation.

Advanced Permasweat breathable sweatband.

Quick fit suspension and adjustable ratchet liner.

Conforms to EN 397:1995 – Lateral deformation.

DOWNLOAD BROCHURE

Maintenance

Complies with the requirements of SANS 1397:2003 and designed to EN 397: 1995 – Lateral deformation.

Remove hard hat suspension system prior to washing.Use a mild soap solution and warm water when cleaning the helmet. Wipe dry with a soft clean cloth and allow to air dry at room temperature.The inner lining should be washed by hand in cold water. Never use harsh chemicals or solvents to clean your hard hat.

Disposal

All industrial waste should be disposed of correctly according to local regulations and good disposal practice. Industrial helmet devices should be disposed of considering the hazardous substances they were used for. Please consider recycling.

Helmet Colours

Green, White