Knitwrist IMPACT GLOVES Hi Viz, Liner-HPPE, Nylon. Coating-Nitrile Foam, EN388 4X43CP

Available Options:


Liner-HPPE, Nylon. Coating-Nitrile Foam,
Colour-Yellow/Red, Length-250mm
A flexible and highly visible glove with TPR impact protection zones
and a nitrile foam sandy coating. Provides level C (ISO 13997) cut resistance
as part of the EN 388:2016 standard,Standards – EN388: 2016 4X43CP


HPPE, glass fibre and nylon liner provides level C cut resistance (EN 388:2016)

Flexible and soft 13gg liner provides excellent comfort

Excellent grip with a nitrile foam sandy coating on the palm

Hi-viz yellow liner for efficient hand signalling in poorly-lit environments

Dense, moulded TPR protection zones on knuckles, fingers, thumb and back of hand

TPR zones are sewn to the liner for increased resistance

Reinforced thumb crotch for enhanced durability

Breathable back of hand to reduce perspiration

Wrist well protected



EN 388:2016 standard,Standards – EN388: 2016 4X43CP


Gloves should not be left in a contaminated condition if re-use is intended especially if potential hazards exist. Before removal from the hands excess contaminant should first be removed from the gloves. Should this not be possible, it is advisable to ease left and right hand gloves off using the gloved hand and remove the gloves without the contaminant contacting the bare hands.

Glove Sizes

Small, Medium, Large, XLarge, XXL, XXXL