Overview

Designed to deliver optimal performance in wet and dry environments where chemical resistance is crucial.

• Unsupported nitrile gauntlet.
• Embossed sand patch finish to enhance grip.
• Chlorinated to improve wet grip.
• Sanitised-bactericide treatment.

Coating Material : Nitrile, Liner material : Flocked
Grip Design : Reversed Lozenge, Cuff Style : Gauntlet,
Colour : Green, AOL : 0.65, Thickness : 0.38mm
Length CM : 38, Antistatic : EN1149
Standards : EN 4101 , EN 374, CAT III
12 pairs per bag – HTS CODE – 4015.19.00

Features

Resistant to solvents, oils, fats, acids and alcohols
High resistance to snags and punctures
15″/ 38cm long, Flocked, Reversed Lozenge, 0.425mm thick
AQL is 0.65 (Cat. III)
Approved to EN388 4101, EN374 (Bio), EN374 (Chem AJL)

DOWNLOAD BROCHURE

Certification

USDA approved.
Approved to BS EN 374:2003 and BS EN 388:2003.

Maintenance

Gloves should not be left in a contaminated condition if re-use is intended especially if potential hazards exist. Before removal from the hands excess contaminant should first be removed from the gloves. Should this not be possible, it is advisable to ease left and right hand gloves off using the gloved hand & remove the gloves without the contaminant contacting the bare hands

Gloves should not be left in a contaminated condition if re-use is intended especially if potential hazards exist. Before removal from the hands excess contaminant should first be removed from the gloves. Should this not be possible, it is advisable to ease left and right hand gloves off using the gloved hand & remove the gloves without the contaminant contacting the bare hands