KEVLAR- LINED, Cut Resistant Gloves Cut Level 4,
Coating Material-Natural rubber latex. Liner Material : DuPont™ Kevlar®.
Grip Design : Crinkle Finish.Cuff Style : Knitwrist. Construction :Knitted.
Colour : Blue & Yellow. Gauge : 10.Finishing : Palm coated. Length : 245-285mm
Standards: CAT II (EN 407 , EN 388 3444). EN Size: 7 – 10
• Ansell’s Powerflex® 80-600 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort.
• The Ansell Powerflex® 80-600 glove is rated at the exceptionally high cut level of EN level 4. This high level of protection is achieved through the Kevlar® knitted liner and the natural rubber coating. This coating also stands up very well to abrasion, tearing and punctures.
• The latex coating’s raised crinkle finish gives the glove an excellent grip in both dry and wet conditions.
• Silicone-free, the Powerflex® 80-600 glove prevents fingerprints on metalised warm insulation glass, leaving surfaces clean and avoiding the need for extra cleaning work
CAT II (EN 407 , EN 388 3444)
Gloves should not be left in contaminated condition if re-use is intended especially if potential hazards exist. Before removal from the hands excess contaminant should first be removed however, should this not be possible, it is advisable to ease left and right hand gloves off using the gloved hand and remove the gloves without the contaminant contacting the bare hands. The gloves may then be decontaminated with mild detergent solution, then rinsed with clean water and dried ideally with some air-movement. All gloves should be thoroughly inspected before use to ensure no damage is present.
All industrial waste should be disposed of correctly according to local regulations and good disposal practice. Gloves should be disposed of considering the hazardous substances they were used for. Please consider recycling.