VISOR:• This eye protector is suitable for use to the lowest marking on the brow guard or visor. Clear material face shields are not intended for welding use. Safety spectacles with side shields are used as primary protection to shield the eyes from heat hazards. To adequately protect the eyes and face from high temperature exposure, use safety spectacles in combination with a heat protective face shield. Only shade 5 green material face shields are suitable for welding use. Wire mesh face shields are not suitable for protection against high speed particles, liquid splash, molten metal splash, hot solids, electrical hazards, furnace or welding use.• Optical class 3 oculars are not intended for long term use
DROMEX EVO VISOR CARRIER for hard hat INTER-EX with PC visor.
The Dromex® HHA carrier system is a universal helmet mounted face shield
and earmuff combination that’s easy to attach and detach, provides optimum
hearing and face protection against liquid splash, medium impact particulate,
molten metal and resistance to penetration of hot solids.
EN 352-1 : 2002 and EN 352-3, EN166 : 2001 and EN 1731 : 2005
The Dromex® HHA carrier system is a universal helmet mounted face shield and earmuff combination that’s easy to attach and detach, provides optimum hearing and face protection against liquid splash, medium impact particulate, molten metal and resistance to penetration of hot solids.Compatible with most industrial helmets, these combination earmuffs and face-shields are suitable for use in construction, general industry, mining, oil and gas, utilities airports, excavation equipment handling, generators, machining, grinding, woodwork and drilling applications
• Material Visor consists of polycarbonate, 1mm thick
• Markings on visor:
EN 166: 2001, 1.B.9, Z87+
1 = ± 0, 06 DIOPTRES PERMANENT WEAR
B = Medium Energy high speed particles 120m/s
9 = Areas of use, Molten Metals and hot solids
Manufactured to EN 352-1:2002 and EN 352-3: 2002, Hearing Protective Equipment, CE certificate 676978 and EN166:2001 and EN 1731:2006,Personal Eye Protection: Face shields, CE certificate 682750 as per the requirements of Eu Type examination certificate, 2016/425 Directive 89/686/EEC by BSI.
VISOR:To maintain the face shield in the best possible condition do not use solvents or abrasive materials to clean. Rinse in a weak solution of mild detergent in clean water and dry with a soft cloth. Scratched or damaged visors should be replaced. Replacement visors are available. Should any difficulties be encountered, connecting or disconnecting the face shield, contact the manufacturer