Overview

3M 60923 CARTRIDGES

3M 60926 CARTRIDGES

3M 7093C CARTRIDGES

The 3M™ 6000 Series Full Face Masks are simple to handle and comfortable to the wearer. The new exhalation port provides increased durability and is easy to keep clean. Available in three sizes, all masks have the 3M™ Bayonet Connection System enabling connection to a broad range of twin lightweight filters to protect against gases, vapours and particulates depending on your individual needs.

Specifications

Colour Light Grey, Dark Grey, Grey
Harness Type 4 point
Net Weight 400 g
Primary Material Silicone/Thermoplastic Elastomer
Product Series Full Face 6000 Series
Product Type Full Face Mask
Recommended Application Construction
Size medium, small, large
Standards/Approvals EN 136:1998 (Class 1

Certifications

EN 136:1998 (Class 1)

Maintenance

Remove cartridge filters from connectors and all inhalation and exhalations valves.- Clean / disinfect the face piece and components with a damp cloth, using lukewarm with all-purpose detergent (neutral, pH 6-8, e.g.: washing-up liquid), warm soapy water or cleaning solution not exceeding 30 degrees.- Do not immerse the product in water or use abrasive cleaners.- Do not use solvents (e.g alcohol, acetone, turpentine), hot water, strong detergents, bleaches or petroleum based products to clean any part of masks.- Dry in air at room temperature.- Replace all components after cleaning and inspect for visible damage.

Shelf life 5 years, with correct maintenance and storage procedures. Discard immediately if mask is damaged and tears are visible.

Materials

None of the materials used in the manufacture are known to adversely affect the hygiene or health.

Disposal

All industrial waste should be disposed of correctly according to local regulations and good disposal practice. Respiratory protective devices should be disposed of considering the hazardous substance they were used for. Please consider recycling.