Polycarbonate anti-mist visor. TPR 5-point adjustable head harness.
Large face seal flange. High efficiency exhalation valve.
Separate mask body. Dual Cartridge System.
For use with – DHCT-ABEK1 Filter Cartridges and DHCT P3PF Pre Filter.
Standards – EN 136 1998
Type: Class1 full face masks for light duty use
Material: Thermo Plastic Elastomer/Rubber
Harness: 5-point comfort harness with 2 grip holes for easier fitting on and removing with gloves and accommodation of women’s hair (ability to wear a pony tail). Withstands a pull of up to 15KG or 150N
Visor: Polycarbonate anti-fog and impact resistant with peripheral optical vision of 220 degree’s (110 on the left and right). The natural field of vision is greater than the 70% specified of EN136:2008 standards.
One size mask body: Accommodates small to large facial size’s Temperature: Designed to withstand temperatures of up to 70 ± 3 ̊ Light weight dual filter cartridge system evenly distributes weight of mask and cartridges on the face.
NRCS Homologated to SANS 50136:1998 CL1 as required by the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993) EN136:2008 approved: Respiratory protective devices full face masks — Requirements, testing, marking quality system as per ISO9001:2008.
Remove cartridge filters from connectors and all inhalation and exhalations valves.- Clean / disinfect the face piece and components with a damp cloth, using lukewarm with all-purpose detergent (neutral, pH 6-8, e.g.: washing-up liquid), warm soapy water or cleaning solution not exceeding 30 degrees.- Do not immerse the product in water or use abrasive cleaners.- Do not use solvents (e.g alcohol, acetone, turpentine), hot water, strong detergents, bleaches or petroleum based products to clean any part of masks.- Dry in air at room temperature.- Replace all components after cleaning and inspect for visible damage.
Shelf life 5 years, with correct maintenance and storage procedures. Discard immediately if mask is damaged and tears are visible.
None of the materials used in the manufacture are known to adversely affect the hygiene or health.
All industrial waste should be disposed of correctly according to local regulations and good disposal practice. Respiratory protective devices should be disposed of considering the hazardous substance they were used for. Please consider recycling.