Overview

Reinforced Wing Thumb and index finger.Palm dipped glove. 100% Dromex Cut 5.
Palm -HCT Hybrid Coating technology multilayer nitrile coating 1.2mm 5%
Industries such as automotive, assembling, steel and glass sheet handling, mining,
construction work, chemical handling and oil and gas.
EN388 4543, EN 407 X1XXXX

Features

Dromex®100%Cut5glovesconsistsofa100%Dromex®Cut5outerliner, reinforcing the HCT (Hybrid coating technology)multi layer nitrile coating thatprovides protection against cut,abrasion and contact heat resistance for 15 seconds at 100°C. For use in industries such as automotive, assembling, steel and glass sheet handling, mining, construction work, chemical handling and oil and gas.

The 57# gloves features a reinforced thumb and index finger whilst, the HCT nitrile coating on the palm gives excellent oil resistance performance.

DOWNLOAD BROCHURE

Certifications

EN388 4543, EN 407 X1XXXX

Maintenance

Gloves should not be left in contaminated condition if re-use is intended especially if potential hazards exist. Before removal from the hands excess contaminant should first be removed however, should this not be possible, it is advisable to ease left and right hand gloves off using the gloved hand & remove the gloves without the contaminant contacting the bare hands. The gloves may then be decontaminated as indicated below.Dromex® Nitrolite gloves have proven that dry cleaning as well as laundering are suitable cleaning methods. We recommend that no bleaching or oxidising ingredients or any fabric softeners be used.Recommended washing temperature is up to 40°C with mild detergents.The drying process may cause felting on the fabric surface. Drying temperature should not exceed 70°C (158°F).

There is no remarkable impact on cut resistance during the normal life cycle of a glove. However depending on the glove construction, staining and cleaning method, the differences in shrinkage, weight loss, yarn strength and colour may occur.In order to maximise the glove life cycle, we recommend the mildest possible cleaning conditions in terms of temperature, chemicals and cycle duration.Due to a wide variety of possible constructions and combinations with other materials we recommend to always consult your professional cleaning service to determine the best suitable cleaning method