Overview

3M 6092 ABEK1P3 R + Formaldehyde Gas and Vapour Filters are designed
specifically for organic vapours, inorganic and acid gases, Ammonia particulates
and Formaldehyde. Suitable for use with 3M™ Reusable Respirators featuring
the Bayonet filter connection system. Reusable Full Face Mask 7097S,
3M Reusable Full Face Masks 6000 Series, 3M Reusable Half Face Mask 7500 Series,
3M Reusable Half Face Mask 6500 and 6500

DOWNLOAD BROCHURE

Maintenance

Respirators should be cleaned, checked for worn or damaged parts before and after use. If filter cartridge is to be re-used do not remove from respirator, but clean filter with cloth & warm soapy water.Dry with a clean cloth. Water must not enter the filter cartridge. To carry out a more thorough cleaning of the respirator, remove the filter cartridge and exhalation valve and wash the complete respirator body in warm, soapy water and dry. Refit components in reverse order from which they were removed. Care should be taken not to damage inhalation/exhalation rubber valves. Conditioning of the valves should be checked weekly and replaced if damaged/deteriorated.DO NOT USE SOLVENTS, STRONG DETERGENTS, BLEACHES OR PETROLEUM BASED PRODUCTS TO CLEAN ANY PART OF MASK.Maximum temperature should not exceed 30 degrees Celsius.

All industrial waste should be disposed of correctly according to local regulations and good disposal practice. Respiratory protective devices should be disposed of considering the hazardous substance they were used for. Please consider recycling